What is it?
Hi-Foam Wash is the perfect companion when you’re performing your contact wash. With it producing the thickest of suds, it removes the need for a 2nd bucket, as the more foam on the vehicle the less likely you’re going to be installing scratches and swirl marks. Hi-Foam Wash lubes up your contact stage making your mitt glide across your paintwork removing stuck on dirt but doing so SAFELY.
Why use it?
We want to be using Hi-Foam Wash as it adds lubricity to the contact wash stage meaning we can wash our vehicle in the safest possible way as we don’t want to be installing any damage to your or your customers vehicles.
It smells absolutely incredible but not only that, the suds produced are the thickest you’ll have ever seen making your contact wash process safe & effective.
How to use it
Once you have performed your prewash your car is now ready for contact.
This is where the damage can occur, so always make sure to get your cannon set up with 100ml of Hi Foam wash and the rest water.
Get your cannon going and lay down a thick layer of suds. Once your vehicle is covered from head-to-toe in Hi-Foam Wash, you’re now ready to get the mitt action going.
Always make sure you have one bucket containing 100ml Pure Shampoo and the rest water, this also adds to the lubrication. Like we said, the more foam on the vehicle the chances of scratching and causing damage is decreased MASSIVLY.
Once fully washed just rinse off from top to bottom and there we have it, a clean factory fresh vehicle without the swirl marks.
Until next time, I've been Matt, and that's detailing.