Ceramico Pro Ceramic Coating Kit



Summon forth Aion, God of eternity and bearer of Ceramico Pro. The Ceramico Pro Ceramic Coating is a blend of highly durable nano-polymers specifically designed to chemically bond to your paintwork. This creates a protective barrier that guards your vehicle against swirl marks, scratches, dirt, and other contaminants, whilst also enhancing the depth of gloss and prolonging the paintwork's flawless finish.

  • Polysilanzane + Formulation
  • Super Hydrophobic Coating
  • Enhances Depth of Gloss and Colour
  • Protects against scratches, swirl marks, hazing, dirt and, grime
  • Lasts up to 3 years*
Key Benefits

POLYSILAZANE + TECHNOLOGY: Derived through Polysilazane based polymers which are very extremely durable and offer the highest level of temperature resistance, surface hardness & corrosion protection.
SUPER HYDROPHOBIC: Adds a super hydrophobic protective layer to your paintwork which allows dirt and grime to be easily rinsed off the surface as they cannot bond to the paintwork, this makes maintenance washes very quick and easy.
ENHANCED DEPTH OF GLOSS & COLOUR: Specially formulated to fill microscopic gaps on the surface of your paintwork to create a perfectly smooth surface that reflects light better and enhances the depth of colour of your paintwork.
LONG-LASTING PROTECTION: Will continue to protect your paintwork from dirt, grime, and other contaminants for up to three years. *This protection is guaranteed if the coating has been applied according to the instructions or by an accredited Car Gods detailer and properly maintained.

How To Use

Phase 1 – Preparation

Fully decontaminate your vehicle's paintwork before applying Ceramico Pro. It is vitally important that you follow the below steps exactly as stated to ensure that Ceramico Pro performs correctly.

What you will need for this phase:

• Gloves
• Wash Mitt
• Car Gods Almighty Power Pre-Wash
• Car Gods Arctic Storm Snow Foam
• Car Gods Pure Shampoo

• Two-Buckets with Grit Guards
• Car Gods Fall Out Eliminator
• Car Gods Clay Bar Kit
• Car Gods Ceramico Pro Pre-Cleanse
• Car Gods Pure Compound

NOTE: Always refer to the directions for use provided on the back label of each of the above products before using them. Use only as directed.

I) Spray Car Gods Almighty Power Pre-Wash directly onto your paintwork to remove any stubborn soils or stains (i.e. bird lime and tree sap).
II) Use Car Gods Arctic Storm Snow Foam to remove traffic film build up from your paintwork.
III) Contact wash your vehicle using the Two-Bucket method and Car Gods Pure Shampoo and rinse thoroughly.
IV) Apply Car Gods Fall Out Eliminator to remove any iron particles in the paintwork.
V) Use Car Gods Clay Bar Kit to remove any contaminants embedded in the paintwork.
VI) Apply Car Gods Tar Remover to remove stubborn tar spots from your paintwork.
VIl) Degrease the surface using Car Gods Ceramico Pro Pre-Cleanse.
VIII) Machine polish the vehicle using Car Gods Pure Compound to remedy any paint defects, light scratches, or oxidation.
IX) Spray Car Gods Ceramico Pro Pre-Cleanse once more to remove any oils that may impair the performance of Ceramico Pro.

TIP: For best results, we recommend rinsing the vehicle after every step to ensure the coating has a thoroughly prepared surface to bond to.