How To Use
Prism Scratch Cover 13ml
For light clear coat scratches and scuffs
- Simply unscrew the cap on the Prism Pen to reveal the fine brush.
- Remove any excess fluid from the brush tip then apply to the scratch in a smooth motion.
- Allow 24 hours for product to fully cure before polishing off any excess with Car Gods Pure Compound Scratch Remover.
For deeper scratches
- Remove the clear cap to reveal the precision pen nib.
- Place the nib as close to the scratch as possible without touching the surface.
- Squeeze the bottle to release fluid into the scratch, applying to the scratch in a smooth motion.
- If several coats are needed, leave for at least one hour before applying a second coat.
To treat stone chips
- Remove clear cap to reveal the pen nib.
- Place the nib as close to the stone chip as possible without touching the surface.
- Squeeze the bottle to release fluid into the nib and carefully apply to the chipped area.
Pure Compound Scratch Remover 150g
- Ensure all surfaces have been cleaned thoroughly and dried before application.
- Fill in scratches and stone chips with the Prism Scratch Cover pen, following the instructions above.
- Shake the tube of Pure Compound well before use.
- Working on the affected area, squeeze Pure Compound onto a damp microfibre cloth or applicator pad and apply onto the bodywork using a circular, overlapping motion.
- Allow to dry to a haze and buff off with a clean dry cloth.
